It is possible to fit 33-inch tires on a 3-inch lifted Toyota Tacoma without the need for trimming. The critical aspect is the 3-inch lift, as anything lower could lead to severe tire rubbing issues. However, there are alternatives to lift kits, such as body mount chopping, fender trimming, or using a spacer kit. For this it’s essential to seek professional guidance or have proper knowledge.
There are many things to know if you are aware of Toyota Tacoma 3 inch lift 33 tires compatibility. You can read this article to have a clear knowledge about lifting your Toyota according to 33” tire.
Key Takeaways
- A a 3-inch lift on a Toyota Tacoma allows for the installation of 33-inch tires without trimming, but removing mud flaps is recommended to prevent scrubbing.
- The cost of a DIY lift installation ranges from $500 to $3,000, while professional mechanic services may cost between $1,000 and $3,000.
- Body mount chopping, fender trimming, and spacer kit are viable options to accommodate 33-inch tires without a lift kit, but professional assistance is advisable due to precision requirements and specialized tools.
Is It Possible to Fit 33 Inch Tires On A 3 Inch Lift Tacoma?
Yes, it is possible to fit 33-inch tires on a 3-inch lifted Toyota Tacoma without the need for trimming.
However, removing mud flaps is advisable to prevent tire scrubbing, particularly off-road. The most common tire sizes for this setup are 31”, 32” and 33”.
It’s crucial to note that a 3-inch lift is necessary for accommodating 33-inch tires on a Tacoma. anything lower than that can result in severe tire rubbing issues.
So, fitting 33-inch tires on an appropriately lifted Tacoma is not only possible but essential for a proper fit.
However, the tire sizes that are compatible with the 3-inch lift in your Toyota Tacoma is highlighted below:
Tire Size | Wheel Size | Notes |
265/75r16 | 16″ | Largest tire for stock Tacoma suspension |
265/70r17 | 17″ | Also largest tire for stock Tacoma suspension |
285/70 R17 | 17″ | Good choice for 3″ lift kit, 2″ taller and 0.8″ wider than factory |
33×10.5 | 5×6” | Fits great with little to no trimming on anything under 4.5″ backspacing (stock wheel) |
31″ – 33″ | 17″ | Common tire sizes for Tacoma with 3″ lift |
As a Toyota owner it is necessary for you to know the issue like blinking tire pressure light in a Toyota car.
Understanding the significance of selecting the appropriate tire size is essential. Opting for the right tire dimensions is vital to maintain the equilibrium of your vehicle’s suspension, drivetrain, and overall performance.
When contemplating larger tires, factors such as tire width, diameter, offset, and clearance must be carefully considered to avoid problems. The problems can be rubbing, limited turning capability, and the potential for vehicle damage.
In essence, proper tire fitment ensures your vehicle operates optimally and safely. So, if you maintain proper tire fitment the lifting of your Toyota Tacoma will be smooth and give you a better driving experience.
Installing process of a 3” Lift Kit On Toyota Tacoma
If you’re considering a lift kit installation for your Toyota Tacoma, it’s strongly advised to enlist the help of automotive professionals. However, if you’re up for the challenge, this section provides step-by-step procedure.
Essential tools:
- Hydraulic floor jack
- Jack stands
- Torque wrench
- Breaker bar
- Ball joint fork,
- large hammer, or mallet
Procedure:
- Begin by using a hydraulic floor jack to lift your Toyota Tacoma and secure it on jack stands.
- Remove the wheels after loosening the lug nuts while the truck is still on the ground.
- Take off the sway bar and disconnect the upper ball joint using a special fork tool or a mallet.
- The trickiest part: use a spring compression tool to safely release the tension from the spring, then insert the spacer.
- Reinstall the strut tower carefully and torque the top nut to 18 foot pounds.
- Replace ball joints, torque to 40 foot-pounds, and secure with new cotter pins. Reattach the sway bar.
- For the rear, lift the truck, remove U-bolts, insert spacers, and reattach U-bolts with recommended torque settings.
- Reinstall the wheels, hand-tighten the lugs, lower the truck, and then fully tighten the lugs.
- Test drive your newly lifted Toyota Tacoma and enjoy the enhanced ride, but remember, professional help is advised if unsure.
If you still have confusion about the installation process, check out this helpful video:
Nevertheless, installing a lift kit can be a complicated process. If you lack confidence, consulting a professional mechanic is strongly advised.
Before going to the next part you can have an idea about Toyota Sienna run-flat tires to explore its advantages.
What Are the Costs of Doing a 3” Lift On Toyota Tacoma?
The cost of performing a 3″ lift on a Toyota Tacoma can vary significantly. If you choose to do the installation yourself, you can expect to spend anywhere from $500 to $3,000, depending on the lift kit’s brand, quality, and features.
In addition to the kit, you’ll need to budget around $50 to $100 for basic tools. However, if you opt for a professional mechanic, the cost may range between $1,000 and $3,000.
It’s essential to keep in mind that there could be additional expenses involved, such as alignment adjustments, and brake upgrades. When considering a lift for your Toyota Tacoma, budgeting for these factors is necessary.
Bonus: If you own a Honda CRV then you need to know how to check tire pressure on a Honda CRV.
What Are The Alternatives of Lifting Kit?
If you don’t want a lift kit to fit the 33” tier in your Toyota Tacoma then it is essential to use these three alternatives. By following these approaches you can easily fit your 33” tire without the hassle of installing a lift kit. So these approaches are:
Body Mount Chopping:
Body mount chopping is an efficient method to accommodate 33-inch tires on 1st and 3rd generation Toyota Tacomas.
It’s important to highlight that fitting a tire of this size in these generations typically doesn’t pose significant issues, except for potential rubbing against the body mount.
It’s a viable DIY option but is recommended to seek professional assistance due to its precision requirements.
Fender Trimming:
While fender trimming can serve as an alternative to a lifting kit, it may not completely resolve the clearance issue with the body mount.
In such cases, additional steps like cutting the body mount or utilizing a spacer kit become necessary.
It’s essential to note that this process is labor-intensive and demands specialized tools. Therefore, it’s advisable to enlist the services of an experienced automotive professional.
Spacer Kit:
The spacer kit is a valid alternative to a lift kit as it increases the space between the suspension/wheel well and the wheel. This adjustment prevents unnecessary rubbing or scraping between the body mount and the wheel well.
It’s particularly crucial for Tacomas with Independent Front Suspension (IFS), which is common in most Toyota Tacoma models.
However, installing a spacer kit can be complex and time-consuming. Therefore, it’s highly recommended to engage the services of a professional automobile mechanic to ensure the proper installation.
Frequently Asked Questions (FAQs):
Is 285 a 33 inch Tire?
Yes. 33 represents the wheel diameter in inches and 285 denotes the tread width in millimeters. Generally, 33-inch tires are equivalent in size to 285/75/16 in metric units. However, 285 tires have a slightly smaller diameter, measuring 32.8 inches instead of a full 33 inches.
What Size Rims for 33 inch Tires?
33-inch tires are compatible with rims that have a width of either 15 or 16 inches. Conversely, for 35-inch tires, it’s advisable to opt for rims that are a minimum of 17 inches wide. Wider rims are essential for larger tires to enhance the tire profile.
What Is the Difference Between 33 and 35 Tyres?
Well, 33-inch tires offer a bit more comfort, whereas 35-inch tires provide superior control. If your terrain includes rough, hilly terrain, opt for 33-inch tires. Conversely, if you primarily drive on flat ground or dirt roads, 35-inch tires are the way to go.
Conclusion
Now you have proper idea if Toyota Tacoma 3 inch Lift 33 Tires compatible or not.
To achieve the right lift in your vehicle’s suspension that matches the size of your tires, it’s crucial to either understand the proper calculations. Otherwise, seek professional guidance. However to accommodate 33-inch tires without a lift kit is to invest effort in creating enough clearance space.