Jeep Renegade Tire Pressure Sensor Problems [Revealed!]

Facing Tire Pressure Sensor Problems on Jeep Renegade? We get the frustration. But don’t worry, with this comprehensive guide, you will get always your answers. 

Jeep Renegade tire pressure sensor problems happen due to prolonged use or if there is any error during the tire changing process. If the tire pressure sensor is not working properly then it is easy to find out. Just check if the TPMS light is turned on or if the service tire pressure system warning is on. Both of these are the most common ways to find out problems with the tire pressure sensor. 

To get an even more detailed overview of the Jeep Renegade tire pressure sensor problems, let’s get started. 

Common Jeep Renegade Tire Pressure Sensor Problems

If the Jeep Renegade tire pressure sensor isn’t working, you’ll see a few symptoms. Normally, the TPMS light will come on and the service tire pressure system warning will pop up. Either way, these are the ways to identify common issues with the Jeep Renegade tire pressure sensor. 

TPMS Light On:

TPMS Light On
Source: Reddit

A damaged tire pressure sensor can trigger the TPMS light due to inaccurate tire pressure readings. When a sensor fails, the TPMS system detects the fault, leading to the illumination or flashing of the warning light.

This serves as an alert for dangerously underinflated or overinflated tires. In case of sensor damage, data transmission to the vehicle’s computer may be hindered, affecting the dashboard or screen display.

Corrosion on or inside the valve stem can also cause sensor failure. The proper functioning of tire pressure sensors is important to avoid issues. Otherwise, there will also be problems with fitting the tires on different wheel sizes.

Check the sensors regularly and maintain the valve stem to ensure their optimal performance, preventing damage and ensuring accurate readings.

Service Tire Pressure System Warning:

Tire Pressure System Warning
Source: Jeep Renegade Forum

A damaged tire pressure sensor can activate the Service Tire Pressure System warning. These sensors are vital components of a vehicle’s Tire Pressure Monitoring System (TPMS), attached to each tire. If you find this problem, it is best to reset the sensor. 

They monitor tire air pressure and transmit data to the vehicle’s computer, which displays it on the dashboard or screen. However, if a sensor is damaged, it may fail to send data accurately. When a sensor detects abnormal tire pressure, it signals the car’s computer, resulting in the illumination of a warning light on the dashboard. 

During vehicle operation, the TPMS warning light blinks if tire pressure drops. Factors such as faulty valve stems, tire damage or punctures can contribute to pressure loss, which must be promptly addressed to prevent tire deflation. 

Regular inspection of tire pressure sensors and valve stems is essential to maintain their proper functioning and prevent damage.

How to Reset Jeep Renegade Tire Pressure Sensor?

Understandably if the tire pressure sensor is not working then you will not know the tire pressure properly. This is a problem, especially in winter. But it is easy to fix this issue. You can reset the Jeep Renegade Tire Pressure sensor. Just follow these steps and you will get the tire pressure sensor running 

Step 1: Start the car and check the tire pressure sensor. Make sure that the tire is inflated to the recommended pressure. 

Step 2: Drive the car for a short distance and the tire pressure sensor should reset itself during the drive. 

Step 3: Check the sensor to verify that the tire pressure reading has been reset. 

Step 4: The sensor will now display the correct tire pressure. 

If the sensor does not reset immediately, continue driving for a brief period.

This process typically takes around 30 seconds of driving. Once the sensor has reset, the tire pressure reading will reflect the correct PSI.

Keep in mind that driving the vehicle is necessary for the reset to occur. This reset process is applicable when you have inflated a tire and need to reset the sensor.

However, remember to drive safely and comply with traffic rules while resetting the tire pressure sensor.

If you are looking for visual guidance on the reset process:

How to Remove Jeep Renegade Tire Pressure Sensor?

Now, if you are in a situation where the tire pressure sensor is completely damaged then it needs a replacement. The steps are easy and here is how you do it. 

Prepare to mount the tire by using a channel and a large C-clamp for stability.

Step 1: Remove the aftermarket tires from the vehicle using proper tools.

Step 2: Deflate the tire and use a tool to break the bead and remove the tire pressure sensor.

Step 3: Install the tire pressure sensor into the stock tire.

Step 4: Inflate the tire and mount it onto the Jeep Renegade and Inspect all wheels, ensuring they are securely fastened.

This 2015 Jeep Renegade Tire Pressure Sensor is a good source to guide you through the process. But before you go on with the process, make sure to check the legal requirements. For example in Virginia, you need to have bolt-on adapters. 

TPMS Issues Beyond Sensor

Apart from the Tire pressure sensor going bad, there are other issues related to TPMS. You will know them through the TPMS light coming on or the service tire pressure system warning. Following are some of the common problems you need to consider.

  • Corrosion
  • Battery Life coming to an end
  • Physical Damage
  • Outdated tools

So, once you verify that the tire pressure sensor is working fine, check these sources and if necessary get them replaced. In some cases, you can go for the tire pressure reset

Frequently Asked Questions (FAQs):

How Often Should I Replace the Tire Pressure Sensors in My Jeep Renegade?

Tire pressure sensors typically last 5-10 years, but their replacement frequency in a Jeep Renegade can vary. Factors such as manufacturer guidelines, driving patterns, and environmental conditions influence this duration. Damaged or faulty sensors may require earlier replacement. To ensure optimal performance, regular inspection of tire pressure sensors and valve stems is advised. 

Are Tire Pressure Sensors Covered Under Warranty for a Jeep Renegade?

Yes, Tire Pressure Sensors are covered under warranty for a Jeep Renegade. You get around 1 year to 2 years of warranty with tire pressure sensors. It is recommended to check with the dealership or the manufacturer for specific warranty coverage details. 

Can a Damaged Valve Stem Affect the Performance of Tire Pressure Sensors in a Jeep Renegade?

Yes, a damaged valve stem can affect the performance of tire pressure sensors in a Jeep Renegade. When the valve stem is compromised, it can result in air leakage from the tire, leading to a decrease in tire pressure. To avoid potential harm to the tire pressure sensors, ensure that the valve stem remains undamaged during both tire removal and installation procedures. 


In conclusion, Jeep Renegade tire pressure sensor problems can be a frustrating issue for owners. It is possible to overcome these challenges if you are armed with knowledge and the appropriate solutions. It does not matter whether it is troubleshooting errors or maintaining proper tire pressure, taking proactive steps will ensure a safer and more enjoyable driving experience. Stay informed, stay vigilant, and bid farewell to those tire pressure sensor woes. Drive confidently in your Jeep Renegade knowing that you’ve tackled the problem head-on.

Abdullah Anas

I am Abdullah Anas, a tire expert. I hate seeing people struggle to find the right tires for their cars. That is why he puts much effort into writing well-researched content about car tires. Today, it’s six years since he started the good work. I have received a lot of positive feedback from his readers and friends. Now my target is to let you understand every detail about all the tires available in the market

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts