A leaking tire leads to reduced tire pressure which triggers the Tire Pressure Light. You need to repair the tire leak to solve this.
Also, Malfunctioning tire pressure sensors can activate the warning light which requires TPMS resetting.
In addition, temperature drops lead to decreased tire air pressure, triggering the tire pressure warning light. Checking the tire pressure and refilling the air can get over the situation.
Finally, the TPMS system’s sensitivity can be responsible as well which needs resetting.
Only knowing the reasons and solutions in a quick manner won’t help you. Hang tight with the whole article to learn the detailed solutions to solve the Honda Civic Tire Pressure Light Keeps Coming on.
Key Takeaways
- Underinflated tires trigger the Honda Civic’s Tire Pressure Light due to leaking tires. A leak must be repaired, and if the problem persists, the tire must be replaced.
- A faulty Tire Pressure Sensor can potentially lead to coming on tire pressure. You need to reset the TPMS system.
- Low Tire Pressure Due to Temperature Change is another reason that requires adding air.
- Finally, it can happen due to TPMS System Sensitivity. So just perform a reset produce to address this.
Honda Civic Tire Pressure Light Keeps Coming on: Reason & Solution
If your Honda Civic’s tire pressure light keeps coming on, it could indicate several issues. So, you should find out the reasons for this underlying along with the solution as soon as possible.
In this section, we will have a quick glimpse of the reasons and solutions before heading to discuss detail. They are also applicable in the case of the blinking tire pressure light of Toyota and the blinking tire pressure light of Nissan.
| Reason | Solution |
| Leaking Tire | Repair or Replace the tire |
| Faulty Tire pressure sensor | Reset the TPMS system & replace the sensor |
| Low Tire pressure due to temperature change | Check the tire pressure and add air |
| TPMS system sensitivity | Recalibrate the system |
Now, it is time to discuss the reasons and solutions in a comprehensive manner.
Reason 1: Leaking Tire
A leaking tire can trigger the Honda Civic’s Tire Pressure Light to repeatedly illuminate due to a decrease in tire pressure. This occurs when air escapes from the tire, causing it to become underinflated.
The Tire Pressure Monitoring System (TPMS) in the Civic detects this drop in pressure and alerts the driver by activating the warning light.
Solution:
To resolve this issue, identifying and fixing the leak in the affected tire is essential. You can fix the tire leaking just by following the procedure below.
Step-By-Step Guide to Fix Tire Leaking:
Required Tools:
- Car jack and tire iron
- Diagonal pliers (wire cutters) and regular pliers
- Tire plug kit (e.g., Slime 2040-A)
- Dish soap and water in a spray bottle
- Large sink or tub of water (optional)
- Protective glasses
Detailed Procedure:
Let’s proceed to the steps one by one.
Step 1: First, Jack up the car so it can be lifted off the ground. After that, remove the lug nuts with a tire iron, and finally slide the tire off.
Step 2: Inspect the tire for the source of the leak, often a nail or screw. If you remain unsure, use the water and soap mixture to identify leaks by bubbles. In addition, air bubbles can be detected by submerging the tire in water.
Step 3: Slide diagonal pliers under the nail’s head and pry it out. If needed, use regular pliers to finish removing it.
Step 4: At this point, you must create the nail hole. In the plug kit, use the auger tool to make the hole uniform. Insert the auger fully, up to the base of the tool handle.
Then, thread a rubber plug through the plug tool’s “eye” and apply rubber cement generously to all plug surfaces.
Step 5: Finally, pull out the auger tool and quickly insert the loaded plug injector tool into the hole. Now, push it down until the handle touches the tire and pull it out, splitting the plug and securing it in the tire.
Trim any protruding plug ends flush with the tire using wire cutters or a sharp knife.
However, if still the leak persists, you must replace the affected tire without further ado. Take help from the following videos on checking tire pressure and changing tires.
Reason 2: Faulty Tire Pressure Sensor
The second possible reason is having a faulty tire pressure sensor.
As a matter of fact, a malfunctioning tire pressure sensor in one or more tires can trigger the tire pressure warning light, even when tire pressure is within the normal range.
Solution:
To address a malfunctioning tire pressure sensor in your Honda Civic, consider these steps:
Step 1: Verify tire pressure manually using a tire pressure gauge. Then, set the tire pressure according to the recommended levels (found on the driver’s side door jamb sticker).
Step 2: If the tire pressure is correct, you can try recalibrating or resetting the TPMS system. Steps may vary according to the Civic’s model year and trim level.
However, here are some general instructions:
- Access “Settings” and then “Vehicle” (for touchscreen display models).
- Choose “TPMS Calibration” and then “Calibrate” (for touchscreen display models).
- Now, utilize steering wheel buttons to navigate the Driver Information Interface (for non-touchscreen models).
- Some older models may feature a TPMS button beside the steering wheel. If available, hold the button down until the warning light blinks twice.
Step 3: After resetting the TPMS system, drive for approximately 30 minutes within the speed range of 30-65 miles per hour. This recalibration process should extinguish the tire pressure light after it is corrected.
If the problem persists despite these efforts, a certified technician should be consulted. They can suggest a suitable remedy, which might entail either replacing the defective tire pressure sensor or re-initializing the system.
Reason 3: Low Tire Pressure Due to Temperature Change
Tire temperature changes affect the PSI of the tire. So, a drop in temperature can lead to reduced air pressure. Later it can trigger the warning light on the tire.
Solution:
To get over the situation you need to check the tire pressure and add necessary air into it. Here are the steps you need to follow.
Step 1: First, identify the valve stem, a small cylindrical protrusion on the tire’s side. Then, remove the valve cap by turning it counterclockwise.
Step 2: Now, firmly press a tire pressure gauge on the valve stem. You should hold it until the gauge provides a PSI (pounds per square inch) reading.
Then, compare this reading to your Civic’s recommended tire pressure. In most cases, this information can be found in the owner’s manual or on a sticker inside the driver’s side door jamb.
Step 3: In this step, when the pressure is below the recommended level, use a gas station or portable air compressor. Short bursts of air should be added to the valve stem using the air hose.
One thing you should remember is that you should check the tire pressure regularly to avoid overinflating.
Step 4: After adding air, reevaluate the tire pressure to ensure it matches the recommended level. Use a pen tip or the back of the valve cap to release some air if it’s too high.
Once tire pressure is adjusted, secure the valve cap by turning it clockwise onto the valve stem.
Reason 4: TPMS System Sensitivity
The Civic’s TPMS system is engineered to detect variations in wheel speed and compare front tire resonance with other wheels.
In some instances, it can become overly sensitive, potentially activating the warning indicator despite normal tire pressure.
Solution:
In such situations, recalibrating or resetting the system may be necessary. This can be done easily by following the process mentioned above.
Frequently Asked Questions (FAQs):
Is It Bad To Drive With The Tire Pressure Light On?
If the light has recently been illuminated, and you’re heading to our shop or an air pump, it should be manageable. Nevertheless, prolonged driving with the light on poses safety risks.
Can A Pothole Damage A Tire Pressure Sensor?
Yes, a pothole can easily damage the tire pressure sensor. Similar to other vehicle components, TPMS sensors can sustain damage or become disconnected at any time.
How Should PSI Be Distributed Between Front And Back Tires?
Typically, both the front and rear tires of a Honda Civic should maintain the same recommended PSI. However, this specification may differ based on the model year and trim level.
Conclusion
Hopefully, you got to know why the Honda Civic Tire Pressure Light Keeps Coming on.
You can resolve the issue easily just by going through the solution provided in the article. Also, ensure that the tire pressure is maintained regularly, and address any sensor issues as soon as possible.
